Page 39 - Computer - 3

4. Enter the desired value in Horizontal and Vertical boxes as required.

5. Click the OK button to resize the drawing as per the entered size.

Size reduced to 75% Size increased to 125%

Knowledge Discovery Subject Enrichment

• To change the size of a drawing horizontally and vertically by the same value, keep the
Maintain aspect ratio check box ticked.
• When using Percentage option, a value above 100 increases the size of the drawing and a
value below 100 decreases the size of the drawing.

CROPPING A DRAWING
Cropping a drawing means to remove unwanted parts from it while keeping a desired
part. The unwanted part of a drawing can be trimmed using the Crop tool.

To crop a drawing:

1. Select the area of the drawing you want to keep using the Select tool.

2

1

2. On the Home tab, in the Image group, click the Crop tool.
The area outside the selection will disappear from the Drawing area.

FLIPPING AND ROTATING A DRAWING

Flipping means to turn a drawing or a selected part of drawing horizontally from left
to right, or vertically upside-down. Rotating means to turn a drawing or a selected

part clockwise or anti-clockwise by 90°.

37